Aerosoft Australia 747 MCP 64bit Drivers

[Blover]

I just recently bought a 747 MCP and unfortunately did not come with any drivers for FSX Windows 7 64bit. If anyone has a copy they could post or email. It would be much appreciated.

[brian747]

Here is the one that I used:

https://www.dropbox.com/s/4ficl0ponzet5ih/Aerosoft%20MCP%2064%20bit%20drivers.zip?dl=0

(The link will remain valid for one month).

I hope it works for you, too.     

Cheers,

Brian

[Blover]

Brian, thanks for the drivers. I installed these successfully.  My MCP is showing active, with my unit # and software version 2.2.
However  it does not interface with FSX, actions on the MCP do not reflect in FSX
I must be missing something.

thanks for your help !

Raymond      Boeing or nothing
                     5m north of rw 31 KFLL ( following a rebuilt, that rw will be shut down )

[brian747]

Hi Raymond!

It's a bit past my bedtime as I write this, so hopefully I might come up with something useful in the morning. In the meantime, however, please allow me to clarify the obvious question -

You are interfacing the unit via John Golin's AdaptPSX, right?

http://flightsim.garryric.com/adaptpsx.htm

More tomorrow, when my brain is a little more wakeful, and I'm on a better machine than an iPad....   

Cheers,

Brian

[Blover]

Brian, problem solved. I received two sets of drivers, identical. I installed the drivers and my MCP was alive with the LVLD 763,
thanks

Raymond

[brian747]

Hi Raymond!

> "I installed the drivers and my MCP was alive with the LVLD 763...."

Delighted to hear you got it working — the Aerosoft Australia MCP is far too good a unit to gather dust on a shelf (mine is still getting very regular exercise, many years on).   

Although, I have to say, if you like the Level-D 763 then you'd go wild for the Aerowinx 744. And Christmas is coming....       (You can find a review of PSX here: http://www.mutleyshangar.com/reviews/bc/psx/psx.htm ).

Clear skies and happy landings,

Brian

[Hessel Oosten]

Although, I have to say, if you like the Level-D 763 then you'd go wild for the Aerowinx 744

And so say "all" of "us" ....(says an old Level-d-er)

Hessel

[18hazelwood]

Hi Brian,

I have recently purchased a Aerosoft Australian 747 MCP.

Have you any ideas where to get usb drivers for it for my PSX 747.

Running Windows 10.

Hope you can help...thanks Steve.

[brian747]

Hi Steve!

You may need 64 bit drivers, too — anyway, you can download all the Aerosoft MCP stuff I have from here: https://www.dropbox.com/s/571wpc3mvefa719/Aerosoft%20MCP747.zip?dl=0

The link will remain valid for one month.

One caveat, though — I have no idea at all whether it works with Windows 10....     

Cheers,

Brian

[18hazelwood]

HI Brian,
Thank you so much for this,  I will download them tomorrow  and try them.

Your help is very much appreciated,  I can't thank you enough...

Steve.

[brian747]

Hi Steve!

My pleasure.   

I hope it all works for you!

(Don't forget to get hold of the latest version of John Golin's AdaptPSX, too, from this page: http://flightsim.garryric.com/adaptpsx.htm).   

Cheers,

Brian

[darrenbathurst]

Here is the one that I used:

https://www.dropbox.com/s/4ficl0ponzet5ih/Aerosoft%20MCP%2064%20bit%20drivers.zip?dl=0

(The link will remain valid for one month).

I hope it works for you, too.     

Cheers,

Brian

Hi Brian,

Im wondering if you still have the drivers for this available?
Ive just purchased one and cant find the drivers anywhere, just references(mainly to you) !!!

Cheers

Darren (SimWh()re)

[brian747]

Hi, Darren!

Apologies for not replying before, but my main simming machine is in pieces at the moment while I add another SSD in an attempt to work round Micro$oft's Windoze 10 (see http://aerowinx.com/board/index.php?topic=3782.msg39387#msg39387).

But once I get a decently working Operating System on the thing I should be able to find my Aerosoft Australia stuff again, and I'll post a link for you. Hopefully, in the next few days.     

Cheers,

Brian

[brian747]

Hi Darren!

OK, I've looked through the archives and collected together what will hopefully be useful stuff for your MCP747, including manuals and both serial and USB drivers.

The zip file will be available until the end of September 2016 from: https://www.dropbox.com/s/cuklvk93euamn6w/Brian%27s%20Aerosoft%20Australia%20MCP747%20collection.zip?dl=0

Good luck!   

Cheers,

Brian

[darrenbathurst]

Brian,

You are a gentleman.

I cannot find the MCP747.exe file. I have hunted everywhere but cannot find it. Do you have it?


Now i just need to get PSX (!!!!!) and check my MCP works.

Roll on Nov for WF where I will get my hands on "The Beast" and get back and install.

Fingers crossed

Darren

[brian747]

Hi Darren!

I've responded to you offline to make things simpler.  :-)

Cheers,

Brian

[darrenbathurst]

Got it thanks Brian.

Much appreciated.

Goong to take it to a friends who has psx and try it there to see if the MCP works!!

Cheers again

Darren

[kev32b]

Hi,

Does anyone have the link for the windows drivers for the 747 mcp for windows 10 or 7 for the aerosoft au 747 mcp
Thanks
Kev

[brian747]

Hi Kev!

You can download from the link below a zip file of everything I have on the AA MCP: if what you need isn't in there, then I can't help, I'm afraid!    8-)

https://www.dropbox.com/s/wvmr30892iirvlk/Brian%27s%20Aerosoft%20Australia%20MCP747%20complete%20collection.zip?dl=0

(The link will remain valid for a month — it's a 15½Mb download).

Cheers,

Brian

[kev32b]

Brian

Thanks very much
Kev