Precision Simulator update 10.172 (20 October 2023) is now available.Navburo update 13 (23 November 2022) is now available.NG FMC and More is released.
Started by JP59, Fri, 8 Dec 2017 16:17
Quote from: brian747 on Wed, 2 Jan 2019 20:38QuoteQuote from: GodAtum on Wed, 2 Jan 2019 15:15 A question about speeds. It looks like simconnect is reporting odd speeds (GS of 319 and IAS of 156, when actually in PSX it's GS of 577 and IAS of 330."This is normal."Normal? Hmm....I vly for a Virtual Airline, whose monitoring software connects to the scenery generator, not to PSX. Does this mean that if I use WidePSX then my VA would receive reports of "odd speeds" and not the actual (PSX) GS/IAS?Cheers,Brian
QuoteQuote from: GodAtum on Wed, 2 Jan 2019 15:15 A question about speeds. It looks like simconnect is reporting odd speeds (GS of 319 and IAS of 156, when actually in PSX it's GS of 577 and IAS of 330."This is normal."
QuoteIf your VA takes values from P3D they will be wrong.
Quote from: JP744 on Wed, 2 Jan 2019 18:26The common error is to forget the very last message when you finished starting engine 1. You must say to the ground engineer he is cleared to disconnect and leave. He will confirm and « Arrival phase standing by... » will be displayed in WidePSX. If you forget this last step you get what you described with the EXT PRW flashing. After some flights using the module you will get used with the sequence.
Quote from: GodAtum on Thu, 3 Jan 2019 00:23On pushback, I respond the "start engine 4". The next call is the engineer saying set parking brakes. Am i missing the calls to start other engines?
Quote from: Jeroen Hoppenbrouwers on Thu, 3 Jan 2019 00:26I've implemented quite some of these "wait for event X to happen to advance the state machine" things, in both sim and real aircraft avionics. It's guaranteed to become a mess if the system can't resynchronize itself using events that "can only mean that the state machine missed a few steps".
Quote from: beat578 on Thu, 3 Jan 2019 12:47PMDG look fancy, but is way too expensive, just to serve as a nice model.
Quote from: JP744 on Sat, 5 Jan 2019 09:24You can opened the doors with the POSKY panel (Shift + 9) in P3D. I will see if I can implement it automatically with the Ground Service Module. Does GSX only needs one entry door to be opened to work ?Regards,Jean-philippe
Quote from: junkun459 on Sat, 12 Jan 2019 14:43Can I use this sequence in near future?