Final Update + Pre-Order (MS747 MCP)

[MinsooPark]

Final Update + Pre-Order Announcement (MS747 MCP)

Hello everyone,

First of all, I owe you an apology for how long this update took.
A significant part of the delay came from the certification process. At one point I ran into a vendor who was not responsible or thorough, and it cost me more time than it should have. The good news is: it has been resolved, and I'm finally here to share the final update and the official pre-order schedule.


Preview video: https://youtu.be/WjCMlKVUwGs














1) Compatibility / Software

The MS747 MCP runs on my own firmware and supports:

Aerowinx PSX (B747-400)
PMDG 747/777 for P3D
PMDG 777 for MSFS
PMDG 747 MSFS and CSS 767-300ER support is planned next

For convenience, P3D/MSFS users may also choose to use MobiFlight, depending on what fits their workflow best.


2) Key Features

747-400 replica MCP with a layout and feel closely matched to the real unit
Fully functional buttons, switches, knobs, and bank limit selector
Bright, customizable backlight, including adjustable amber intensity to simulate the warm incandescent look of older airframes
Two-color annunciator lamps (green / amber) with adjustable brightness
Fully working 747 DSP panel
Everything configurable under one firmware for consistent tuning and customization

3) Pre-Order Schedule & Pricing

Pre-order window: March 6 – March 30
Pre-order price: $459 -> $399


4) Warranty & Order Progress Updates

Warranty: 2 years

After ordering, you will receive progress updates in four stages:

1. Parts sourcing   2. In production   3. Packing   4. Shipment


Thank you again for your patience, encouragement, and the constructive push to "ship it right."
I'm excited (and honestly relieved) to finally share this properly.

More photos, videos, and the ordering link will be posted with the pre-order opening.

— Minsoo Park

[SwissMark]

Hello Minsoo

Thank you.

Looking forward to receiving my unit, so that I can finally replace my CP Flight 737MCP. Pre-order request sent via E-mail.

Cheers

Mark

[Avi]

Hi Minsoo,

A late question for you.

Does pressing the CANC and RCL buttons at the same time resets latch status messages?

Here is another test for you:

1. Engine 1 (for example) shutdown.
2. At the Malfunctions / Engines page active severe  Ignition failure - engine 1.
3. Start engine 1 (or try to...).
4. After few seconds push the starter switch IN and set the fuel control switch to CUTOFF.
5. You should have now status messages ENG 1 IGNITOR 1 and ENG 1 IGNITOR 2.
6. Repair the malfunction and start the engine.

The status messages remain as they are latch. To remove them you need to press at the same time the CANC and RCL buttons.
In PSX it is done by putting the mouse cursor between them and pressing (and holding) for few seconds.
Does it work with your unit?

Thanks,

P.S.
If you don't have it, this is what you meed:
Qh113="EicasCancRcl"; Mode=DELTA; Min=0;Max=1;

[asboyd]

Hi Minsoo,
I assume you are using USD for the price (I ask because we use AUD in Oz).

Look forward to pre-ordering...

Cheers,
AlexB

[Will]

Hi Minsoo,

Can you  please tell me the dimensions of the unit? How deep is it? Thanks.

[Christian_Norway]

Hi Minsoo,
This is really good news, been waiting ages for a good B747 MCP alternative, so thanks for making this happen!
Looking forward to pre-ordering details!
Kind regards
Christian

[MinsooPark]

Hello Minsoo

Thank you.

Looking forward to receiving my unit, so that I can finally replace my CP Flight 737MCP. Pre-order request sent via E-mail.

Cheers

Mark

Hi Mark,
I've received your email and I'll reply shortly. Thank you always for your continued support.
Sincerely,
Minsoo Park

[MinsooPark]

Hi Minsoo,

A late question for you.

Does pressing the CANC and RCL buttons at the same time resets latch status messages?

Here is another test for you:

1. Engine 1 (for example) shutdown.
2. At the Malfunctions / Engines page active severe  Ignition failure - engine 1.
3. Start engine 1 (or try to...).
4. After few seconds push the starter switch IN and set the fuel control switch to CUTOFF.
5. You should have now status messages ENG 1 IGNITOR 1 and ENG 1 IGNITOR 2.
6. Repair the malfunction and start the engine.

The status messages remain as they are latch. To remove them you need to press at the same time the CANC and RCL buttons.
In PSX it is done by putting the mouse cursor between them and pressing (and holding) for few seconds.
Does it work with your unit?

Thanks,

P.S.
If you don't have it, this is what you meed:
Qh113="EicasCancRcl"; Mode=DELTA; Min=0;Max=1;

Hi Avi,
Implemented — thank you for the great feedback. If possible, I'll share a short test video in this thread.
Sincerely,
Minsoo Park

[MinsooPark]

Hi Minsoo,
I assume you are using USD for the price (I ask because we use AUD in Oz).

Look forward to pre-ordering...

Cheers,
AlexB

Hi AlexB,
Sorry for the confusion. I will provide USD as the default payment option, and I'm planning to support additional currencies as well.
Sincerely,
Minsoo Park

[MinsooPark]

Hi Minsoo,

Can you  please tell me the dimensions of the unit? How deep is it? Thanks.

Hi Will,
The dimensions are 520 (W) × 80 (H) × 80 (D) mm.
Sincerely,
Minsoo Park

[MinsooPark]

Hi Minsoo,
This is really good news, been waiting ages for a good B747 MCP alternative, so thanks for making this happen!
Looking forward to pre-ordering details!
Kind regards
Christian

Hi Christian,
Thank you for waiting for such a long time — I truly appreciate it.
Sincerely,
Minsoo Park

[roccod]

Hi Minsoo, is the pre-order window now open?

[MinsooPark]

Hi Minsoo, is the pre-order window now open?

Hi,
I'm sorry for the inconvenience.
The page was opening normally in my country, but I later confirmed that it was not accessible properly from overseas. I'm currently working on the issue and checking what caused it.
I'll post an update here as soon as it is fully fixed and opened.
Sincerely,
Minsoo Park

[MinsooPark]

Pre-order is now OPEN.
https://www.mikesierraaero.com/

Thank you for waiting captains.

[macroflight]

Let me be the first to congratulate you on getting this far! Pre-order placed!

[roccod]

Hi Minsoo, I am trying to pre-order (to the US) but the Paypal option (which is the only alternative) says not working at this time?

[MinsooPark]

Let me be the first to congratulate you on getting this far! Pre-order placed!

Thank you so much! I'll do my best to get in so that I can satisfy you until the end!

Sincerely,
Minsoo Park

[MinsooPark]

Hi Minsoo, I am trying to pre-order (to the US) but the Paypal option (which is the only alternative) says not working at this time?

I'm sorry for the inconvenience. Could you send me an error screen to my e-mail? It is msaerodev@gmail.com

Sincerely,
Minsoo Park

[MinsooPark]

Sales are temporarily paused due to a PayPal issue(Due to high volume purchase within short term)
I expect to restore everything within 1–2 days.

Now all problem fixed. You can make an order!


I'm truely sorry for inconvenience!

[Christian_Norway]

Sales are temporarily paused due to a PayPal issue(Due to high volume purchase within short term)
I expect to restore everything within 1–2 days.

I'm truely sorry for inconvenience!

Not the worst challenge to have... ;-)