Questions about XView with X-Plane 11

[Takayoshi Sasano]

Hello!

At the moment I'm switching back and forth between MSFS, XP11 and XP12. XP11 in regards of performance of course is the best working option, XP12 has some issues with XView, MSFS thanks to PSX.NET is the most complete solution so far.

There are some glitches with XView/XP11 in my setup - do they seem familiar? Are there some configuration workarounds I've been missing?
- altitude: the aircraft shows as hovering from the very beginning of the flight, discovered that when connecting flight logging tools and the like. As a result they don't log takeoff as well.
- flare: just before touchdown the XP airplane seems to fly over a "hump".

Since XP11 is a phantastic solution for less performant setups it would be nice to have this connection running in the best way possible, so any advice is appreciated.

Thanks in advance!

Cheers

Yoshi

[Ton van Bochove]

There are some glitches with XView/XP11 in my setup - do they seem familiar?

Hi Yoshi, the things you describe I don't recognize. For me it works perfect, the only problem I have is the freezing of XP11 but that can be solved by setting XP in pause.

[Takayoshi Sasano]

Hi Yoshi, the things you describe I don't recognize. For me it works perfect, the only problem I have is the freezing of XP11 but that can be solved by setting XP in pause.

Hey Ton,

thank you for your reply. Then it has to be something in my setup. Could you please show me/link the post containing the XView version you use?

Thanks in advance!

Cheers

Yoshi

[Ton van Bochove]

If you use my email I will return the config

[Iadbound]

Ton -- I can't see your email here.  I suspect others probably can't either. 

[Takayoshi Sasano]

If you use my email I will return the config

Hi Ton,

I'd love to, but as ladbound suspected I can't see any email address.
Could you maybe drop me a short message?
takayoshi AT sasano DOT eu

Cheers

Yoshi

[Andrea1]

Hi colleagues,
me too..this summer I realized that to have xwiev and xplane11 perfectly working with psx I had to put xplane11 in "pause" mode, I don't know why..
Best Regards
Andrea Buono - Como I

[Ton van Bochove]

Don't you see a small envelope under my name?

[Takayoshi Sasano]

Don't you see a small envelope under my name?

No, I don't. See one below mine?

Cheers

Yoshi

[Iadbound]

Ton - same. I don't see an envelope below your name.

[Ton van Bochove]

No, I don't. See one below mine?

Cheers

Yoshi

No I don't see it. For the people who want to be connected to the other forum members maybe this feature can be activated?

[Hardy Heinlin]

Email cannot be activated anymore. Users see just their own email and IP.


|-|ardy

[Takayoshi Sasano]

Email cannot be activated anymore. Users see just their own email and IP.


|-|ardy

Thank you for clarification, we already got into contact.

Cheers

Yoshi

[Iadbound]

Ton - could you contact me too? Thinking about trying XP with PSX too --

[Takayoshi Sasano]

Hi Yoshi, the things you describe I don't recognize. For me it works perfect, the only problem I have is the freezing of XP11 but that can be solved by setting XP in pause.

Ton, thank you very much for sharing your configuration, I just tested it.
Unfortunately the issue regarding external tools (SimToolKitPro, Volanta and vmsACARS) not recognising takeoff or landing events still exists.
This might be a dead end unless someone could dive into the code and have a closer look or something new arises.

Thanks a lot again for your help!

Cheers

Yoshi

[Ton van Bochove]

Unfortunately the issue regarding external tools (SimToolKitPro, Volanta and vmsACARS) not recognising takeoff or landing events still exists.
This might be a dead end unless someone could dive into the code and have a closer look or something new arises.

Hi Yoshi, A pity it does not work with your external tools. Without the tools it gives a stabile environment in XP 11 I hope?  Xview was written for XP9 and 10, the stabile connection for XP 11 was luck. Xview does not work with XP12 either.

[Takayoshi Sasano]

Without the tools it gives a stabile environment in XP 11 I hope?

Hi Ton,
indeed I do, it's just the external tools which seem not to be able to read the required data correctly from the aircraft in the sim. All those issues would be solved once the tools provide native support for PSX. I'm working on that :-)

Cheers

Yoshi

[Bluestar]

Hello!

At the moment I'm switching back and forth between MSFS, XP11 and XP12. XP11 in regards of performance of course is the best working option, XP12 has some issues with XView, MSFS thanks to PSX.NET is the most complete solution so far.

There are some glitches with XView/XP11 in my setup - do they seem familiar? Are there some configuration workarounds I've been missing?
- altitude: the aircraft shows as hovering from the very beginning of the flight, discovered that when connecting flight logging tools and the like. As a result they don't log takeoff as well.
- flare: just before touchdown the XP airplane seems to fly over a "hump".

Since XP11 is a phantastic solution for less performant setups it would be nice to have this connection running in the best way possible, so any advice is appreciated.

Thanks in advance!

Cheers

Yoshi

Yoshi,

Are you still working on getting X-plane 12 to work with PSX?

I like X-plane 12 better than MSFS because it is closer to the scenery in the Level-D sims I fly from time to time.