X plane 11.5

[Ton van Bochove]

Since an upgrade to 11.5 ( no vulkan used) X plane crashes after an hour or so. Are there more users who experience this?

[PSX747atlas]

check your plugins some are not 11.5 compatible yet with / without vulcan activated

[Ton van Bochove]

Thanks, I will do that.....I only hope that Xview is compatible otherwise X Plane/PSX users have a big problem!

[PSX747atlas]

xview works perfectly I use 11.50 with vulcan and psx.

[Ton van Bochove]

That is good news! I disabled Terramax and Traffic global and it looks like that one of these is the problem.

[CarlBB]

Sharing a tip in case it is useful.
When I used X-Plane for the visuals, I created a copy of x-plane specifically for PSX. I removed anything that I will not use for PSX.
Carl

[Captain_Crow]

On my side, there was a FlyWithLua Script, which was not okay...
Using XP11.50 not in Vulkan to get Xsquawkbox running well... FPS are the same using the PSX Aircraft..
Best
Steff

[vnangli]

I have almost a similar experience. X-Plane 11 (11.5 , VULCAN) hangs as soon as I load a new SITU in PSX.

Here is the sequence I have followed:
1) Start PSX, Load a situation
2) Start X-Plane 11, Load the PSX 747 (in XPlane 11)
3) RELOAD ALL PLUGINS and AIRCRAFT in X-Plane 11, so that the plane position in Xplane 11 is updated by PSX

From the day 11.5 Beta was made available, I have never been able to NORMALLY exit X-Plane 11 when used with PSX. For e.g. if run X-plane 11 default airplanes and other Addons (apart from PSX), the application EXITs normally.

But with PSX, I always had to force quit. Gave up my attempts. It has been over a month that I have used X-Plane 11. PSX keeps me busy and happy

[PSX747atlas]

you will have issues with 11.5 but if you are loading up from last position (last situ) then you wont have issues, load up x-plane 11 first, using resume last scenario, once fully loaded start psx then all the addons like bacars etc and you will be ok, if you reload another situ then it will freeze for a while, 5 mins been the longest for me so far but will load up at the gate.  also worth noting is the 2 latest nvidia drivers have been causing me CTD with vulcan so may be worth going back a couple of drivers and test.

[Ton van Bochove]

Thanks for all the tips! If you stay on OpenGL is there still a reason to step over to 11.50? My W8 does not support Vulkan and my W10 scenery computer with GeForce RTX 2080 doesn't support Vulkan either: must be a driver issue or something like that ;-)

[PSX747atlas]

using OpenGL only then not really, but your 2080 should support unless your using AMD processor?  im using GTX1060 and have no issue with Vulcan  what nvidia driver are you using?

[Ton van Bochove]

No, an i7 10700 processor. I am not at this computer on the moment so I cannot check the driver(s), thanks anyhow!

[andrej]

Ton,
I had similar issue with the XP11.5 and only thing was needed was to update drivers (NVIDIA). I am glad updated to Vulkan version as my fps increased dramatically (that way I can use better settings).

Cheers,

[Ton van Bochove]

Thank you  Andrej, I will update the Nvidia drivers. I will see if it will also work for my W8 setup

[asboyd]

I am using an AMD FX3+ 8350 with a GeForce 1070 and XP 11.5 with Vulkan works very well with my setup.
I have had no issues with loading PSX situ's or starting at the gate each time. If I start X-Plane first then load PSX with my CnD at YSSY Gate 32 scenario then X-Plane re-positions the aircraft at the gate once connected...

I only have a few addons, mainly ORBX and a couple of airports.....

Cheers,

[Ton van Bochove]

My start sequence is PSX first and than X-plane. Will try the other way around to see if this improves

[Hammerstan]

What are people using to connect to Vatsim with PSX+XP11 (vulkan)+XView?

I am using xSquawkBox 2.1 which works for voice but doesn't render any vatsim traffic.  v3.1 which will be Vulkan compatible is yet to be released.

[PSX747atlas]

I use xpilot, but I only run with a few monitors over 2 pc;s so I can go into 2d cockpit to turn battery and stby power on then back to full view so I have the audio work with xpilot and see other traffic.