Old 744 Forum

Archived posts

joysticks

Page: 1

Author Post
Member
Registered: Jan 2015
Posts: 19
hello,

I use BUO836 and BU0836X interfaces from leo Bodnar but they are not recognized by aerowinx psx.

Any ideaif and what can be done??

thanks in advance

regards
CJK
Moderator
Registered: May 2009
Posts: 5140
Hello,

open the pref file you are using (normally Default.pref) with a text editor.

Search for this line:

UsbUnknownIncl=0

Replace it by this:

UsbUnknownIncl=1

And save.

Pref files are in the Preferences folder.

You need PSX version 10.0.1 or higher for this feature.


Regards,

|-|ardy
Member
Registered: Jan 2015
Posts: 19
good evening,

well done, thanks, now steering by hand and hard landings possible

best regards
CJK
Member
Registered: May 2009
Posts: 91
Location: Centennial, Colorado USA
Hardy,

I have one joystick controller out of four that is not recognized. When I change UsbUnknownInc1=1 I lose the three that were assignable although I get a ton of other miscellaneous stuff. By chance did one of the later builds corrupt this feature?

Jon
Moderator
Registered: May 2009
Posts: 5140
On my system it works perfectly.

Have you checked your cables?


|-|ardy
Member
Registered: May 2009
Posts: 91
Location: Centennial, Colorado USA
Yes. All four controllers show up in windows. I neglected to say it but I'm using 10.0.4 beta21 for the tests. I just found it strange that when I changed the parameter to 1 the three controllers that were showing up disappeared as well.

Oh well... Worth asking the question anyway.

Jon
Moderator
Registered: May 2009
Posts: 5140
Did you check Aerowinx/Developers/USB-Detect.txt?

Have you installed the new Interfaces for beta21?


|-|ardy
Member
Registered: May 2009
Posts: 91
Location: Centennial, Colorado USA
New interfaces have been installed. I will read the USB detect file when I get into the customers building this morning

Jon

Page: 1

Old 744 Forum is powered by UseBB 1 Forum Software