Old 744 Forum

Archived posts

B 747-400 Throttle Quadrant

Page: 1

Author Post
Member
Registered: Nov 2010
Posts: 139
Location: Vienna
Hi all!

Perhaps you know my HP, and found that I'm working on my genuine TQ.

Luckily my TQ includes the motor, gear box etc. for the autothrottle. The motor has 24 pins to connect. Now I'm looking for details like voltage, pinout etc. Here's a picture of the motor!

Anyone who can help?

As far as I know, Simulator Solutions are now working on a new SimStack board with interfacing capabilities to the ARINC 429 bus standard. Hopefully at the end I'm able to drive my thrust levers via PSX.

Thanks in advance and BR from Vienna!
Hans
_______________
Hans G. Schuetz
http://B747-400.net
Member
Registered: Jun 2009
Posts: 87
Location: KMEM
Drop me a PM, for I have access to the entire 744 AMM - I'm sure Chapter 73 would help...
Member
Registered: Nov 2010
Posts: 139
Location: Vienna
Hi Doug,

thanks a lot. But your profile wont give me a "send a message" but a "hidden" e-mail instead :(

Please use my profile or Hans [8)] B747-400 [D8)T] net to contact me ... many thanks!

BR Hans
_______________
Hans G. Schuetz
http://B747-400.net
Member
Registered: May 2010
Posts: 843
Quote
Here's a picture of the motor!


That brought back a few memories. Those things are tricky to change. Lots of nuts and bolts to drop into the cavity below the pedestal (above the A Zone cabin ceiling). :?
Member
Registered: Nov 2010
Posts: 139
Location: Vienna
Ohhh yesss ... but to remove the flaps transducer is a pain in the a... :evil:

Do you have a genueine 747-400 TQ as well?

BR
Hans
_______________
Hans G. Schuetz
http://B747-400.net
Member
Registered: May 2010
Posts: 843
No, I had dozens of real 747-400's ;)

Page: 1

Old 744 Forum is powered by UseBB 1 Forum Software