rcp opencockpits module psxseecon

[noo]

Digit rcp opencockpits module is not fonctional with psxseecon.
where is the problem with my script sioc?

Var 2092 Static
   
Var 3022 Static name RcpLa
{
  CALL &DecBCD6 &RcpLa
  &D_COM1L0 = &Digit0   
  &D_COM1L1 = &Digit1
  &D_COM1L2 = &Digit2
  &D_COM1L3 = &Digit3
  &D_COM1L4 = &Digit4
  L0 = TESTBIT &RcpLa 24   // VHF DP
  IF L0 = 1
  {
    &D_COM1L5 = &Digit5
    &O_DPCOM1L = 1
  }
  ELSE
  {
    L0 = TESTBIT &RcpLa 25  // HF DP
    IF L0 = 1
    {
      &D_COM1L5 = -999999  // blank
      &O_DPCOM1L = 1      // same DP as for VHF
    }
    ELSE
    {
      &D_COM1L5 = &Digit5
      &O_DPCOM1L = 0       
    }
  }
}

Var 3023 Static name RcpLs
{
  CALL &DecBCD6 &RcpLs
  &D_COM1R0 = &Digit0 
  &D_COM1R1 = &Digit1
  &D_COM1R2 = &Digit2
  &D_COM1R3 = &Digit3
  &D_COM1R4 = &Digit4
  L0 = TESTBIT &RcpLs 24   // VHF DP
  IF L0 = 1
  {
    &D_COM1R5 = &Digit5
    &O_DPCOM1R = 1
  }
  ELSE
  {
    L0 = TESTBIT &RcpLs 25  // HF DP
    IF L0 = 1
    {
      &D_COM1R5 = -999999   // blank
      &O_DPCOM1R = 1       // same DP as for VHF
    }
    ELSE
    {
      &D_COM1R5 = &Digit5
      &O_DPCOM1R = 0
    }
  }
}


// active standby toggle

Var 3607 Static Link IOCARD_SW Device 8 Input 6 Type P   


// Test button: switch between VHF-L and VHF-R (at this left radio module)
Var 9000 name TestCOM1 Link IOCARD_SW Device 8 Input 2 Type P   
{
  IF &TestCOM1 = 1
  {
    &VHFLR_but = CHANGEBITN 0 &VHFLR_but
  }
  ELSE
  {
    &VHFLL_but = CHANGEBITN 0 &VHFLL_but
  }

}

Var 3601 Static name VHFLL_but
Var 3603 Static name VHFLR_but


// rotary encoders

Var 3691 Static name BigFreqL Link IOCARD_ENCODER Device 8 Input 0 Aceleration 1 Type 2     
Var 3692 Static name SmaFreqL Link IOCARD_ENCODER Device 8 Input 4 Aceleration 1 Type 2     

// ACTIVE display in COM737
Var 9008 name D_COM1L0 Link IOCARD_DISPLAY Device 8 Digit 0 Numbers 1 
Var 9009 name D_COM1L1 Link IOCARD_DISPLAY Device 8 Digit 1 Numbers 1
Var 9010 name D_COM1L2 Link IOCARD_DISPLAY Device 8 Digit 2 Numbers 1
Var 9011 name D_COM1L3 Link IOCARD_DISPLAY Device 8 Digit 3 Numbers 1
Var 9012 name D_COM1L4 Link IOCARD_DISPLAY Device 8 Digit 4 Numbers 1
Var 9013 name D_COM1L5 Link IOCARD_DISPLAY Device 8 Digit 5 Numbers 1

// STANDBY display in COM737
Var 9014 name D_COM1R0 Link IOCARD_DISPLAY Device 8 Digit 6 Numbers 1
Var 9015 name D_COM1R1 Link IOCARD_DISPLAY Device 8 Digit 7 Numbers 1
Var 9016 name D_COM1R2 Link IOCARD_DISPLAY Device 8 Digit 8 Numbers 1
Var 9017 name D_COM1R3 Link IOCARD_DISPLAY Device 8 Digit 9 Numbers 1
Var 9018 name D_COM1R4 Link IOCARD_DISPLAY Device 8 Digit 10 Numbers 1
Var 9019 name D_COM1R5 Link IOCARD_DISPLAY Device 8 Digit 11 Numbers 1
   
Var 9020 name O_DPCOM1L Link IOCARD_OUT Device 8 Output 20     
Var 9021 name O_DPCOM1R Link IOCARD_OUT Device 8 Output 21     

[asboyd]

You need to use the 1digit file as a second script, otherwise the digits are not converted correctly and do not show up.
So make sioc.lst and include 1_Digit.txt and your RCP txt file.

Cheers,
Alex B

[noo]

It's your PSXcockpit zip Asboyd.
For my tcas panel, ok
CDU ans EFIS , ok
But RCP,  problem digit with script.

And with the program opencockpits IOCModules test ok

[noo]

Yes i have,
1digit.txt
Rcp.txt

But nothing on my panel